Produktai skirti esp32 c3 mikro 1 (29)

XMC/PMC 64-Bit PowerPC™ T1022 Prozessor-Board mit FPGA

The PIC24FJ64GB106-I/PT is a 16-bit microcontroller from Microchip Integrated Circuits (ICs) that features a 64KB FLASH program memory, 16K x 8 RAM size, 32MHz maximum clock frequency, and 16 ADC channels. It is packaged in a 64-TQFP case and has a unit weight of 0.012720 oz. Kynix Part #:KY32-PIC24FJ64GB106-I/PT Manufacturer Part #:TLV2464AMPWREP Product Category:Instrumentation Amplifier Manufacturer:Texas Instruments Package:Tape & Reel (TR)Cut Tape (CT)Digi-Reel® Quantity:14330 PCS Lead Time:3(168 Hours)

- Geringer Energieverbrauch von 5 bis 10 Watt - Intel® HD-Grafik der Generation 7 - Industrie-Temperaturbereich - 3. Generation Intel® Atom™ / Celeron®

Power Architecture module with MPC5200 from Freescale Key functionalities Freescale MPC5200 (Power Architecture), 400 MHz High graphics performance through integrated graphics controller (SM501/SM502) Substantial computing power, numerous interfaces Multifunctional external busses (PCI / ATA / IDE) Compact outer dimensions (80mm x 60mm) Low power dissipation, passive cooling Robust 0,8mm mezzanine connection system, long-term availability

The TM range of computer on modules was designed to deliver ultra small and low cost modules that can be used in space and power limited applications. Born in the era of the Raspberry Pi and other low cost boards the TM range manages to provide not only a true embedded, long life platform at a cost that rivals consumer but also a range of supported operating systems and free in-house technical support. NXP iMX6 ARM Cortex A9 single-core processor ARM NEON coprocessor 1GB of Low Power DDR3 memory MicroSD or eMMC storage devices Wi-Fi & Bluetooth optional Up to 60 GPIO lines with selectable 1.8 or 3.3 voltage levels Extended operating temperature range Android and Ubuntu Linux LTS operating systems supported

For discrete dosage and continuous delivery The controller S-BL is recommended for high requirements in control of discrete and continuous delivery tasks in combination with a mzr-pump with special brushless motor. The 16-bit microcontroller allows speed and position control for highly accurate dosage. The compact design on a PCB offers flexible installation. Process control link can be established via a RS-232 interface. Motor speed or flow rate can be set either by an analog input (0-10 V) or a potentiometer mounted on the PCB. Programs for dosage can be saved in the memory. Advantages High quality pump controller for continuous delivery and discrete dosage For mzr-pumps with special brushless motor Programming of controller with Windows® software »Motion Manager« Potentiometer for speed set Analog input 0-10 V 1 digital input, input is equipped with a switch 1 digital output, optionally programmable as input Two colored LED status indicator EEPROM memory RS-232 interface Controller:PI-controller, speed and position control Supply voltage:24 V DC (12 – 30 V) Velocity range:1 - 6.000 rpm Voltage:DIN 45323 socket, screw terminal Pump connector:DIN 45323 socket, screw terminal Serial interface:RS-232, SUB-D plug, 9-pole Input # 1 (speed):0 - 10 V Error output (input # 2):connected to GND; as input: low 0...0.5 V / high 4 V...UB Digital inputs # 3:low 0...0.5 V / high 4...30 V; input # 3 with switch Program memory:6,600bytes Protection class:IP 20 Dimensions (L x W x H):approx. 112 x 85 x 36 mm Weight:approx. 170 g Remarks:Subject to technical changes.

Die ESX-3CS ist eine kompakte, robuste und leistungsfähige Steuerung. Neben der ESX-3CM rundet die ESX-3CS (C = Compact, S = Small) die dritte Generation der ESX-Steuergeräte ab. Das „C“ steht für Kompakt (compact) und weist darauf hin, dass bereits alle Pins per Hardwaredefinition fix vergeben sind. Die Funktionen dieser Pins können per Software noch genauer definiert werden. Beide Steuergeräte sind auch für sicherheitsgerichtete Anwendungen bis Performance Level PL d bzw. Safety Integrity Level SIL 2 geeignet und bauen auf ein gemeinsames Architektur-Konzept: Im robusten Alu-Druckguss-Gehäuse mit Automotive-Steckverbindern arbeitet ein schneller 32-Bit-Microcontroller mit vier MB Flash und acht MB SRAM, bis zu zwei CAN-Schnittstellen, einer seriellen Schnittstelle, Ethernet, LIN und zwei LEDs. Anwendung:Mobile Arbeitsmaschinen Gehäuse:Alu-Druckguss Schutzklasse:IP6k9k (ohne Ethernet-Anschluss) Schutzklasse:IP6k7 (mit Ethernet-Anschluss) SRAM:288 kB internal SDRAM:8 MB external Flash:4 MB internal EEPROM:32 kB CAN-Schnittstellen:2 RS232-Schnittstellen:optional Ethernet-Schnittstellen:optional LIN-Schnittstellen:optional Eingänge:16 Ausgänge:15 Programmiersprache:C Programmiersprache:CODESYS V3.5 IEC61131-3

Der FPGA-basierte Hardwarebeschleuniger übernimmt komplexe Bildvorverarbeitungen und kann einfach in das Design von Embedded Vision Elektroniken integriert werden.

Power Architecture module with MPC5200 from Freescale. Key functionalities Freescale MPC5200 (Power Architecture), 400 MHz Substantial computing power, numerous interfaces Multifunctional external bus (PCI / ATA / IDE) Up to 6 serial interfaces Compact outer dimensions (60mm x 56mm) Low power dissipation, passive cooling Robust 0,8mm mezzanine connection system, long-term availability Temperature sensor

LF et/ou HF, module SMD, sans antenneThe TWN4 MultiTech Nano RFID modules are also fully TWN technology compliant RFID readers. Their miniature size and low energy consumption allows for integration in smaller battery powered consumer devices like tablet PCs, POS terminals, mobile payment systems, etc. Furthermore their components are mounted to only one side, which facilitates an easy placement on the main circuit board. In order to test the functionality of all supported interfaces (e.g. OMRON, RS485/422 etc.) and to develop custom reader applications, we also offer a development board as well as an I/O extender for the TWN4 MultiTech Nano modules. supports TWN MultiTech underlying technology Available either as LF & HF or for LF or HF only compliance to EMV contactless protocol specification support of wireless (re)configuration with the components mounted to one side, it facilitates easy placement on the main circuit board

The SenseCeiver Wireless Sensor Gateway has been developed specifically for industrial 4-20mA sensors and by using energy-saving components excellent energy efficiency was achieved. It has thanks to its optimized hardware and software a particularly long battery life and also enables a solar operation. Measure and monitor via the galvanic isolated electrically input for sensors everything you need for your IoT applications. Wireless Sensor Gateway has an additional 12V battery connector to also be able to supply the industrial sensor with voltage. Data can be sent by SMS or GPRS to a device of your choice or to a cloud. It uses a dual-band GPRS modem. The Wireless Sensor Gateway can reach up to 6 months continuous operation on battery power with a 1.35AH battery under optimum working conditions. The Wireless Sensor Gateway switches to sleep mode after sending data which is controlled by a Microchip PIC. The data are sent at preset intervals via HTTP or SMS. The Wireless Sensor...

LTE Cat.1 Quectel EC21 est une série de modules LTE de catégorie 1 optimisés spécialement pour les applications M2M et IoT. Il dispose d’une connectivité LTE rentable et à faible puissance et offre des vitesses optimisées en M2M de 10 Mbit/s downlink et 5Mbit/s uplink. Celles-ci font d’EC21 une solution idéale pour de nombreuses applications IoT qui ne dépendent pas de la connectivité haute vitesse mais qui nécessitent toujours la longévité et la fiabilité des réseaux LTE. EC21 est compatible avec le module Quectel UMTS/HSPA+ UC20 et le module multi-mode LTE EC20/EC25 dans le facteur de forme compact et unifié. Il contient 9 variantes. Cela le rend rétrocompatible avec les réseaux EDGE et GSM/GPRS existants, ce qui lui permet de migrer facilement de LTE vers les réseaux 2G ou 3G. EC21 prend en charge la technologie de localisation Gen8C Lite de Qualcomm™® IZat (GPS, GLONASS, BeiDou, Galileo et QZSS). Améliorations des fonctionnalités:prend en charge DFOTA*, eCall*, QuecLocator et DTMF

Extend your PingPong baseboard without great effort to additional RF / ISM functionality or use it as a standalone RF / ISM transmitter.

Das sysWORXX CANopen IO-X3 ist ein digitales CANopen I/O Modul mit 24 Ausgängen. Das Modul ist ein sehr kompaktes und kosteneffektives CANopen IO Modul mit industriell bewährten I/O‘s.

Poiwer over Ethernet-Modul, soliert über Flyback-Transformer, max. 30 Watt, 12 Volt Ausgangs-Spannung • Power over Ethernet Modul • isoliert über Flyback-Transformer • max 30 Watt • 12 Volt Ausgangs-Spannung

BC95-G est un module nb-ioT haute performance avec une consommation d’énergie extrêmement faible BC95-G est un module nb-ioT haute performance qui prend en charge plusieurs bandes de fréquences B1/B3/B8/B5/B20/B28* avec une consommation d’énergie extrêmement faible. Le profil ultra-compact de 23,6 mm × 19,9 mm × 2,2 mm en fait un choix parfait pour les applications sensibles à la taille. Conçu pour être compatible avec le module Quectel GSM/GPRS M95 dans le facteur de forme compact et unifié, il offre une plate-forme flexible et évolutive pour la migration des réseaux GSM/GPRS vers les réseaux NB-IoT. BC95-G adopte la technologie montée en surface, ce qui en fait une solution idéale pour des conceptions durables et robustes. Le profil bas et la petite taille du package LCC permettent à BC95-G d’être facilement intégré dans les applications limitées dans l’espace et de fournir une connectivité fiable avec les applications. Temps de mise sur le marché rapide:Conceptions de référence, outils d’évaluation et support technique en temps opportun minimisent

Eurofarad CA155 MICA Capacitors 2nF 400V 2% - CAPACITORS Condition:New Manufacturer:EUROFARAD P/N:CA155 Type:MICA Capacitors

You need software for your embedded device, IoT device or a device driver? Windows, Linux or cloud services? Our focus is on the development of embedded and real-time applications and the associated GUI or backend software in the cloud. Our references in software development and electronics development speak for themselves. We have the ability to manufacture small and medium product quantities.

ECR45 and ECR60 all codes available.

Riparazione e revisione centralina Cpc3 Mercedes.

HCMOS TCXO at 32.768kHz or from 20kHz to 50kHz. 7.0 x 5.0mm SMD package. Stability from ±1ppm -30°~+75°C Miniature 7 x 5 x 2.3mm SMD package Frequency range: 20.0kHz to 52.7kHz including 32.768kHz Supply voltage +3.3 Volts Frequency stability from ±1ppm over -30 to +75°C RoHS compliant Product Series Code TCXO:EM572T VCTCXO: VEM572T Frequency Range:20.0kHz to 52.7kHz Standard Frequency:32.768kHz Output Waveform:Squarewave, HCMOS Initial Calibration Tolerance:<±2.0ppm at +25°±2°C Frequency Stability vs. Ageing:±1.0 ppm max. first year vs. Voltage Change: ±0.2 ppm max. ±5% change Supply Voltage:+3.3 V Output Logic Levels:Logic High: 90% Vdd min Logic Low: 10% Vdd max Rise and Fall Times:10ns max Duty Cycle:50%±10% standard, 50%±5% option Start-up Time:10ms max Output Load:15pF Storage Temperature:-55~+125°C

The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. Features • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver • RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths • RGMII with 3.3V/2.5V/1.8V tolerant I/Os • Auto-negotiation to automatically select the highest link up speed (10/100/1000Mbps) and duplex (half/full) • On-chip termination resistors for the differential pairs • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core • Jumbo frame support up to 16KB • 125MHz reference clock output Kynix Part #:KY32-KSZ9031RNXIC-TR Manufacturer Part #:KSZ9031RNXIC-TR Product Category:Interface - Drivers, Receivers, Transceivers Manufacturer:Microchip Technology Description:IC TXRX ETHERNET Package:VQFN48 Quantity:7275 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The ecoHarmony EPC 2.0 Lite is an entry level option in the EPC 2.0 family of EVSE controllers. It is the same form-factor DIN rail mounted module designed for IEC 61851 compliant EV charge points, but simplified for certain applications. The 35mm wide module can support 1 charging outlet; either a socket outlet or a tethered cable, and has an option for 6mA DC leakage detection that help charge point manufacturers and installers meet regulations in a cost-effective way. The IC input allows for configurable charging current as well as enabling access control expansion options with other hardware, including impulse signals to enable charging. It has an internal status indicator LED and support for an external LED.

ARM9 module with i.MX28 from Freescale Key functionalities Smallest ARM9 module High quantity use 2x IEEE1588 Ethernet (L2 Switch) Extended temperature range Low power consumption (typ. 1 W) Long-term availability Power management Battery charge functionality IEC 61850 stack

Power Architecture module with Freescale QorIQ™ P1020 processor. Key functionalities Easiest migration of PowerQUICC III on QorIQ™ by approved e500v2 core Single (P1011/P1012)- and MultiCores (P1020/P1021) of 400 up to 2x 800 MHz in 45nm SOI for best Performance/Watt ratio High-Speed communication via 3x Gigabit Ethernet, 2x PCIe and one USB 2.0 interface Simple function extension via PCIe, SPI, I²C and flexible local bus

FGJ IQX0-151JI 18.0000MHz - INTEGRATED CIRCUITS - IC Condition:New Manufacturer:FGJ P/N:IQX0-151JI 18.0000MHz

ACTR8027 is SMD SAW Resonator with 868MHz centre frequency, tolerance: ±150kHz, insertion loss 1.8dB, Temperature range from -40 to 85°C, 6 Pad.

Facteur de forme du module M.2 (NGFF) de catégorie LTE Quectel EM05 is an LTE category 4 module adopting standard M.2 (NGFF) form factor. The space-saving M.2 form factor allows EM05 to be easily integrated into smaller and thinner devices. With a maximum data rate of 150Mbps downlink and 50Mbps uplink, it is optimized specially for M2M and IoT applications. EM05 contains three variants: EM05-CE, EM05-CML and EM05-E*, which can provide data connectivity on LTE-FDD, LTE-TDD, DC-HSDPA, HSPA+, HSDPA, HSUPA, WCDMA and CDMA networks. A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB drivers for Windows XP, Windows Vista, Windows 7, Windows 8/8.1, Windows 10, Linux, Android/eCall*) extend the applicability of the module to a wide range of M2M applications such as industrial router, industrial PDA, rugged tablet PC, video surveillance and digital signage. Feature refinements:supports DFOTA, eCall* and DTMF

E Series este o gamă de amplificatoare de mare putere cu sursa in comutatie, destinate celor mai înalte standarde de fiabilitate și calitate a sunetului. Dezvoltat pentru piața Touring, Seria E păstrează integritatea sonica de referință MC și T Series fiind foarte usoare. Sursa de alimentare în comutație este capabila de a oferi vârfuri înalte, fără bass "sag" , perceptibilă la distorsiuni foarte mici și se păstrează în zona de operare în condiții de siguranță de către "inteligentul" limitator din noua, sofisticata tehnologie MC² Audio .E15, E25, E45 și E4-75 MC² Audio ofera un sunet de ultra-înaltă definiție, livrat pe întreaga lățime de bandă audio.